Affordable Solar TX

Jersey Village, Texas

Solar Installer in Jersey Village, TX: Flood Zone First

If your Jersey Village home is in a mapped flood zone, the City adds up 12 months of repairs and renovations against half your building's tax-roll value, and solar may land in that total. Check the zone first, then place the equipment, then match the system to a buyback plan.

Get your free quote

Private website concept.

Check the flood zone before you ask for a quote

Start with one question: is your house inside the special flood hazard area (SFHA)? That is the land a flood insurance rate map (FIRM) shows in the 1% annual-chance floodplain, marked zone AE or floodway. Shaded zone X is the 0.2% (500-year) floodplain. Unshaded X sits outside both.

Don't guess from your street. In the April 18, 2016 Tax Day flood, 238 homes in Jersey Village flooded, according to Community Impact, and the same reporting names White Oak Bayou as the city's main flood problem. Hurricane Harvey brought the bayou close to overflowing the next year.

Find the zone on the map that counts

The City's flood ordinance adopts the Harris County Flood Insurance Study and FIRMs dated November 15, 2019, "and any revisions thereto". That effective map is the one a permit is judged against. Look up your address on FEMA's Flood Map Service Center and write down the zone.

You may also see Harris County's newer MAAPnext maps. As of November 18, 2026, MAAPnext lists its map status as draft: the maps "are not final, cannot be used for insurance or regulatory decisions". Read them for awareness. Don't let an installer place equipment, or talk you out of a mapped zone, based on them.

Get the elevation certificate

An elevation certificate is a surveyed form that records the height of your lowest floor and of machinery such as the air-conditioning unit. The City's Home Elevations page says that if you don't have one, "a surveyor can provide one for you", or you can file a public information request to see whether the City already has one on file. Ask the City first. It may save you a survey fee.

Know the design flood elevation

The design flood elevation (DFE) is the height the City wants protected floors and equipment to reach. Freeboard is the safety margin above a flood level. Jersey Village measures freeboard from the 0.2% (500-year) flood elevation, not from the 1% (100-year) level that FEMA uses as its minimum. Table 14-5 of the City code reads:

Zone Design flood elevation in Table 14-5
Floodway 36 inches above the 0.2% flood elevation
AE 24 inches above the 0.2% flood elevation
Shaded X At or above the 500-year floodplain elevation
Unshaded X No additional freeboard above the 0.2% level

The floodway and AE figures are printed for pier-and-beam construction. If your house sits on a slab, ask the floodplain administrator which figure applies to you.

Then compare. The gap between your certificate's lowest-floor or garage-floor figure and your zone's DFE is the height question for every piece of solar equipment mounted near the ground.

Two questions for the floodplain administrator

Under §14-225 of the Jersey Village Code of Ordinances, Chapter 14, a floodplain development permit is required before "locating, altering, or changing the use of any structure" in a special flood hazard area. The Director of Public Works is the floodplain administrator. The text doesn't say whether rooftop solar counts as altering the structure. So ask:

  1. Does a rooftop solar installation on my SFHA house need a floodplain development permit as well as the solar permit?
  2. Do solar and battery costs count toward the 12-month 50% total described below?

Get both answers in writing before you sign anything.

Ask for the inverter, disconnects and battery above the DFE

Roof panels sit above any flood. The parts at risk are mounted near the ground: the inverter (the box that turns the panels' DC power into household AC), the disconnects (switches that cut the solar circuit), any battery, and the conduit between them.

For new construction and substantial improvements in an SFHA, §14-225 requires electrical equipment to be "designed and/or located so as to prevent water from entering or accumulating within the components during conditions of flooding". For an ordinary solar retrofit, the City code we read sets no rule that requires raising solar equipment. Treat height as a design request, not a legal requirement:

  • Ask each installer to mark the height of the inverter, disconnects and any battery against your DFE on the site drawing.
  • If a part would sit below the DFE, ask for the reason in writing and the cost of mounting it higher.
  • Ask for any extra wall rack and conduit as its own quote line, so you can keep it out of the price-per-watt check later.

A battery needs the most care. A garage is the usual place for one, and in an AE home the garage slab may sit well below the DFE. Ask where the battery can go, why there, and what the manufacturer's instructions allow. If no spot clears the DFE, the honest answer may be no battery for now. That choice changes what your buyback plan is worth, which the plan sections below work through.

Time the spending: the 12-month 50% test

The City's flood chapter already defines a substantial improvement as work costing 50% or more of a building's market value. Section 14-359, the City's local amendment to the residential building code, goes further for homes in the floodplain. If, within any 12-month period, alterations, additions, renovations, repairs "or any combination thereof" cost more than 50% of the building's value, the building and its "mechanical, electrical, plumbing and fuel gas equipment" must be brought up to the DFE. A solar job can then turn into an elevation project.

Two details make this a Jersey Village calculation:

  • The value is the tax roll. The ordinance uses the building's "appraised value as shown on the city's latest tax roll", or an independent professional appraisal. Your tax statement may list land and improvements separately, so ask the administrator which figure counts.
  • The window is rolling. The test adds every project in any 12 months, not one permit at a time. The ordinance doesn't name solar or batteries, which is why the second administrator question matters.

Settle the roof first

The same section limits roof work: "not more than 25 percent of the roof covering" may be replaced in any 12 months unless the entire covering is brought up to the code for new buildings. If an installer says the roof needs patching before panels go on, ask how much of the covering the patch replaces. A big patch can become a full re-roof, and the re-roof joins your 12-month total. Decide the roof before the solar contract.

Run the sum on your own numbers

Illustrative example · the 12-month 50% test. A zone AE house has a building value of $210,000 on the latest tax roll. Half is $105,000 in any 12 months. Every figure below is hypothetical; use your own.

Planned work in the same 12 months Illustrative cost
Solar array and installation, 9.2 kW DC $25,760
Wall rack and extra conduit to mount the inverter and disconnect above the DFE $1,620
Main electrical panel upgrade $2,400
Battery $14,500
Roof replacement $17,500
Kitchen remodel $48,000
Total if every line counts (Illustrative) $109,780

At $109,780 the illustrative total is over the line. If every item counts, the whole house and its mechanical, electrical and plumbing equipment would have to meet the DFE.

Now move the levers. Push the kitchen into the next 12-month window and the total falls to $61,780 (Illustrative). Keep the kitchen but drop the battery, and it falls to $95,280 (Illustrative): under the line by only $9,720, which one surprise repair could use up. Which lines count is the floodplain administrator's call, so take this sheet to that office before you sign.

The Jersey Village permit route

The City's Residential Building Permits page sets out the route:

  1. All residential applications go through the Vertex Plans portal, and inspections are scheduled online.
  2. "Solar Projects" appear under electrical work and "Solar panel installations" under other projects.
  3. If your home is within a special flood hazard area, "you may need a permit for these projects". That is the first administrator question above.
  4. Homeowners may pull their own permits only for work they do themselves. If an installer does the work, ask in writing who files.
  5. The City's FAQ says every insurance certificate must name the City of Jersey Village as additional insured, and a missing or incorrect one delays the application.
  6. The City's Building Safety and Permits office states a current turnaround of "1-5 business days".

Fees sit in the Code of Ordinances fee schedule, which we could not read when we checked. Ask for the permit fee as its own quote line.

CenterPoint delivers; your retail provider buys the extra power

In Jersey Village the plan question comes after the flood question, because where a battery can sit, or whether it fits at all, decides how much power you send to the grid. The plan sets what that power earns.

Jersey Village is in CenterPoint Energy Houston Electric's delivery territory, with retail choice. CenterPoint is the wires utility that owns the lines and meter. You buy electricity from a retail electric provider (REP), the company named on your bill.

Texas has no statewide net metering. Under Texas Utilities Code §39.916, a solar owner in a retail-choice area "must sell the owner's surplus electricity produced to the retail electric provider that serves the ... owner's load at a value agreed to" between owner and REP. So the plan, not the panels, sets what every exported kilowatt-hour (kWh) earns.

The terms sit on the plan's Electricity Facts Label (EFL), the fact sheet every REP publishes for each plan. EcoGen's Texas incentive notes describe three broad buyback structures:

Buyback structure How exports are valued What to check on the EFL
Credit capped at energy charges or usage A bill credit per exported kWh, up to your energy charges or monthly use Exports above the cap may earn nothing; delivery and base charges may not be offset
Fixed export rate A set price per exported kWh Whether the rate holds for the whole term
Real-time wholesale rate The market price when you export The value moves; ask how it is set

The same notes say credits can take up to three billing cycles to start. Check the renewal date and early-termination fee too, because buyback terms can change at renewal.

Size to your own use

Under §39.916(k), neither you nor the system owner has to register with the Public Utility Commission if the system's estimated yearly output is at or below your estimated yearly use. In Jersey Village a use-matched array does a second job: a smaller solar line keeps your 12-month total lower.

How the battery choice changes what the plan is worth

Here the flood decision and the plan decision meet. A battery stores midday solar for the evening, so fewer kWh are exported and the plan matters less. No battery, or a small one that fits above the DFE, means more exports, and the plan carries more of the value.

Illustrative calculation · what the plan does to one system's exports. 9.2 kW DC × 1,428 kWh per kW per year (EcoGen CSV v1-2026, Houston production factor) ≈ 13,138 kWh a year. Average Texas use in the same file is 1,096 kWh a month, or 13,152 kWh a year, so for a household at that average this size just passes the size-to-use test. With no battery, assume 40% of output is exported because the house is empty at midday (assumption): about 5,255 kWh.

Hypothetical export value (not from any EFL) Yearly value of 5,255 exported kWh (Illustrative)
12¢ per kWh about $631
6¢ per kWh about $315
3¢ per kWh about $158

Same roof, same panels: about $473 a year apart (Illustrative), set only by the plan. A battery moves part of those kWh to evening use, which narrows the gap. It also adds its price to your 12-month total if the administrator counts it.

So the order in Jersey Village runs: flood zone, battery location, export share, plan. Your real export share depends on when your household uses power, and your meter's interval data shows that.

The Affordable Solar TX home page describes a plan-match sheet (Proposed service) that would price your monthly exports under each structure from EFLs printed on the day, with and without a battery. It would compare plan structures only, name no provider, take no commission, and leave the choice of plan to you.

Check the price per watt without the flood lines

A Jersey Village quote can carry flood-height mounting, extra conduit, a panel upgrade or a battery. Divide the whole quote by its watts and the solar looks expensive, so take those lines out first.

Price per watt ($/W) is the cash price divided by the DC size in watts. DC size is the panels' rated output added together: twenty-three 400-watt panels make 9.2 kW, or 9,200 W.

EcoGen's Texas Solar Cost Index puts the state at $2.57 per watt (State benchmark, September 2026 Edition, prices as of September 25, 2026), cash, host-owned, before incentives, for a typical 9.29 kW system. EcoGen describes the index as a modeled installed price per watt before incentives, not a price any installer has offered.

Illustrative calculation · $/W with the Jersey Village extras separated. A quote of $29,780 for 9.2 kW DC, no battery.

Step Illustrative figure
Whole quote ÷ 9,200 W $3.24/W, about 26% above $2.57
Less DFE-height mounting and conduit −$1,620
Less main-panel upgrade −$2,400
Solar-only line $25,760
Solar-only ÷ 9,200 W $2.80/W, $0.23 (about 9%) above the State benchmark

Treat the 9% as a question for the installer. Roof type, equipment and scope differ from the model, so the gap alone does not prove overpricing.

Compare before incentives, because the benchmark is pre-incentive. Then check two money facts:

  • CenterPoint's incentive. CenterPoint's solar program pays $135 per kW of rated DC size, capped at 15 kW. The incentive goes to participating service providers, not to you, so ask how it would appear on your invoice. Only existing single-family homes qualify, existing solar installations do not, and you must sign an interconnection agreement with CenterPoint. On 9.2 kW that is $1,242 (Illustrative calculation), but only if your installer participates and program funds remain. Ask both.
  • No federal credit for owned systems. The residential clean energy credit (Section 25D) is not available for property placed in service after December 31, 2025, according to the IRS. For a system you buy and switch on in 2026, count it as $0.

What the proposed Jersey Village quote would include

Affordable Solar TX is a proposed solar service for Houston-area homeowners. Coverage of Jersey Village is proposed and not yet confirmed. None of what follows is an operating offer yet.

What you would bring (Proposed service): your bill, your plan's EFL, 12 months of 15-minute interval data from Smart Meter Texas, your elevation certificate and your building's tax-roll value. The on-site check would take about 90 minutes (Illustrative duration).

What you would get in writing (Proposed service):

  1. System quote. Layout, DC kW, yearly kWh, the solar-only cash price and its $/W. DFE-height mounting, panel upgrade and any battery as separate lines, each with its height marked against your DFE. The CenterPoint incentive only if the installer is an enrolled participating provider.
  2. Plan-match sheet. Monthly exports and their value under each buyback structure at that day's EFL rates, with caps, credit rules and renewal date, with and without a battery.
  3. Size-to-use note. Whether yearly output stays at or below your yearly use.
  4. 12-month spending sheet. Every planned project set against 50% of your building's tax-roll value, laid out for the floodplain administrator. It would be a worksheet; the ruling stays with the administrator.
  5. Responsibility list. Who files on Vertex Plans, who sends the insurance certificate naming the City, who asks the administrator the two questions, and who files CenterPoint interconnection.

The spending sheet and the DFE heights come first. Without them, the plan match rests on a battery decision nobody checked against the flood rules.

Contract terms and papers to keep

According to TDLR's summary of what is in effect, a Texas residential solar contract must conspicuously state the name and license number of the electrical contractor, say who obtains the permit and the utility's interconnection approval, and let you cancel in writing on or before the fifth business day. Since September 1, 2026, residential solar retailers and salespersons must be registered with TDLR. Ask for both numbers and check them with TDLR before you sign.

If your subdivision has deed restrictions, read them too. Texas Property Code §202.010 limits how far a property owners' association can restrict solar, and the City's flood chapter says that where its rules and a deed restriction overlap, the stricter one prevails.

Then keep a folder for a later buyer, an insurer or the City:

  • the permit and final inspection record;
  • the CenterPoint interconnection agreement;
  • your elevation certificate and the administrator's written answers;
  • the EFL in force when the system was switched on;
  • the site drawing with equipment heights against the DFE.

A buyer looking at a Jersey Village house will ask about flooding. This folder answers the solar side of that question. Texas also exempts solar energy devices from property tax under Tax Code §11.27; you apply on Form 50-123 with the appraisal district.

Jersey Village quote checklist: questions before you sign

Take this list to every quote, alongside the quote checklist on this site.

  1. Zone. What zone does the effective FIRM (November 15, 2019, and revisions) show for my address? Ignore MAAPnext drafts for permits.
  2. Certificate. Do I have an elevation certificate, or does the City have one on file?
  3. Administrator. Do I have written answers on the floodplain permit and on whether solar and battery costs count toward the 50% total? Which DFE figure applies to my foundation?
  4. Equipment height. Does the drawing show the inverter, disconnects and battery against my DFE, with a written reason for anything lower?
  5. 12-month total. Have I listed every project for the next 12 months against 50% of my building's tax-roll value?
  6. Roof. Is the roof settled first, and would any patch replace more than 25% of the covering?
  7. Permit filing. Who files on Vertex Plans, and does the insurance certificate name the City as additional insured?
  8. Exports. What are my monthly exports, with and without a battery, under each buyback structure at today's EFLs?
  9. Size. Is yearly output at or below my yearly use?
  10. Price. What is the solar-only $/W before the CenterPoint incentive, and does the installer participate?
  11. Contract. Does it name the electrical contractor and license number, show the TDLR registration, say who files the permit and interconnection, and give five business days to cancel?

If a quote leaves out the flood lines, it only compares panels. In Jersey Village, that is half the decision.