Affordable Solar TX

Humble, Texas

Solar Installer in Humble, TX: Check the Address First

A "Humble, TX" address can be permitted by the City of Humble, the City of Houston or no city at all. That decides what paperwork your solar quote must include. Check the address first, then the price per watt, then match the system to the buyback plan that will pay for your exports.

Get your free quote

Private website concept.

Check the address before you compare quotes

Before you ask for a solar layout, find out who governs your roof. Your mailing address will not tell you. "Humble" is a postal name, and the City of Humble's legal boundary, its city limits, does not follow it.

The City's building department tells applicants to check the address on the City of Humble GIS map first. Do that before any installer visit. It settles which office permits your roof.

You will land in one of three places:

  • Inside the City of Humble. The City's Building & Inspection department permits the work, with its own paperwork.
  • Inside the City of Houston. Census Bureau maps place Kingwood, and some points east of Atascocita toward Lake Houston, inside Houston city limits, even where the mail says Humble.
  • In unincorporated Harris County. Unincorporated means no city government covers the lot. Atascocita is a census-designated place (CDP), a name the Census Bureau uses for counting, not a city. Permits there follow Harris County's rules.

Then read your bill for the company that delivers the power. On the Public Utility Commission's service-area map, every Harris County point sampled for this page showed CenterPoint Energy. The same map, which the PUC labels unofficial, shows Entergy Texas at some Montgomery County points in ZIP 77339, one of them inside Houston city limits. The slice is small, but it changes how your exports are paid and whether CenterPoint's solar incentive applies.

Write down three things before you talk to anyone: the permit office, the utility on the bill and the county.

Three permit routes behind one "Humble" address

Your route sets what a good quote for your roof has to name.

What changes City of Humble City of Houston (Kingwood, some Atascocita-area pockets) Unincorporated Harris County (Atascocita CDP)
Who permits the roof City of Humble Building & Inspection, City Hall, 114 W. Higgins St Houston Permitting Center No city. The County Engineer's permit list names no solar or residential electrical permit (confirm)
How plans go in Paper: plan sets in person or by courier Automated review for eligible rooftop systems, reported in 2023 (confirm current rules) No solar plan review listed; HOA approval if the lot is deed-restricted
Contractor registration City registration before the permit is issued Ask the installer Not listed
Delivery utility CenterPoint CenterPoint, except a small Entergy Texas slice in Montgomery County, 77339 CenterPoint
CenterPoint $135/kW incentive Available through a participating provider Same, except in the Entergy slice Available through a participating provider

The Houston route

The Texas Solar Energy Society reported in 2023 that the Houston Permitting Center uses SolarAPP+, an online tool that runs an automated code check on standard home rooftop systems. That is a dated secondary report, and the Permitting Center's own pages could not be read on November 18, 2026. Ask any installer quoting a Kingwood roof whether your system qualifies today, and who files it.

The unincorporated route

Harris County's Office of the County Engineer permit list covers residential construction, septic, site development, floodplain and fire code. It lists no permit for rooftop solar or residential electrical work. That is a list, not a ruling, so call the County Engineer and ask two things: is a permit needed for a rooftop system, and does a floodplain development permit apply to a retrofit on your lot?

Beyond that, the gates are the homeowners' association, if the lot is deed-restricted, and CenterPoint's interconnection agreement. Under Texas Property Code §202.010, an association may not ban solar devices outright. It can still restrict panels above the roofline, and it can steer them to a designated area unless your preferred spot would produce more than 10% more energy a year. Ask the installer to show the layout against your association's rules before you sign.

What the City of Humble asks for on a solar job

Inside the City, much of the solar paperwork still moves on paper.

The City's Building & Inspection page lists "adding solar panels" among the projects that "require plan submission". Plan submission means the permit office reviews drawings of the job before it issues a permit. Most such permits "will not be available for online submission", the page says, so plans go in person or by courier.

For a rooftop system, the City's published requirements add up to five items:

  1. Two complete plan sets. A plan set is the bundle of drawings for the job: roof layout, mounting and electrical work.
  2. An electrical one-line diagram and load calculations. The one-line diagram is a single-page map of how the panels, inverter, disconnects and main panel connect. The load calculation checks that your main panel can take the added equipment. The City's residential plan packet requires master and contractor's licenses for electrical work under the 2017 National Electrical Code.
  3. The R-100 residential permit application. The form on the City's online forms page (revision May 2020) asks for one application per permit type, the flood zone, the base flood elevation and the sub-contractor master's name and license number. A flood zone is the FEMA map category for your lot. The base flood elevation (BFE) is the height the 1%-a-year flood is expected to reach there.
  4. A FEMA elevation certificate if the lot is in the floodplain. The City also says a floodplain development permit is "often" required even when a construction permit is not.
  5. City contractor registration before the permit is issued.

You can fill in item 3 yourself before any quote. The City's plan packet points applicants to the Harris County Flood Education Mapping Tool for floodplain information. Look up your lot there and bring the flood zone to the first meeting. If the lot sits in the floodplain, ask early who orders the elevation certificate, because it can hold up the R-100.

Under the City's contractor registration rules, a contractor registers through the permit portal, at the kiosk at 114 W. Higgins St, or by notarized letter when registering remotely. The insurance certificate must name the City as certificate holder. Registration costs $100 per calendar year, January 1 to December 31. Responsible master electricians and master plumbers, and some other trades, are exempt from the fee. Registration is not needed to submit plans, but it must be done before the City issues the permit.

The City's fee schedule effective October 1, 2024 lists residential electrical permits at $100 for remodel or addition work and $50 for "all other/minimum", plus a plan review fee of half the permit cost. It does not name a solar line, so ask the City which one applies. One rule is not ambiguous: work that starts before the permit is issued costs "a fee equal to double the amount of all required permits".

Check the price against Texas's $2.57 per watt

Next, check whether the price is fair. Divide the solar-only cash price by the system's size in watts. DC kW (kilowatts of direct current) is the combined rated output of the panels, so a 9.0 kW system is 9,000 watts. The result, the price per watt ($/W), lets you compare quotes of different sizes.

Compare it with the State benchmark: EcoGen's Texas cost page shows $2.57 per watt in its September 2026 Edition, with prices as of September 25, 2026, which puts a typical 9.29 kW system at $23,875. EcoGen describes the index as a modeled installed price for a representative home, paid in cash, before incentives. It is not an average of quotes in Humble.

Divide only after you split out the battery, main-panel upgrade and roof work. Folded into one total, they make a fair solar price look expensive, or hide an expensive one. For a City of Humble address, the same division also tells you whether the job may cross the City's $20,000 engineer-seal line, worked through in the example below.

Then check what is still on the table in 2026:

  • No federal credit for an owned system. The IRS says the residential clean energy credit is "not available for any property placed in service after December 31, 2025". At least one Houston-area page in this search still quotes a 26% federal credit. Treat any quote built on it as out of date.
  • The CenterPoint incentive. CenterPoint's solar program pays $135 per kW of rated DC size, capped at 15 kW, for existing single-family homes. New construction and existing solar installations are not eligible. You must sign an interconnection agreement, CenterPoint's approval to connect your system to its lines. It is "not a direct-to-customer program": a participating provider applies the credit to your invoice. In the Entergy slice of 77339, this CenterPoint program is not the one that applies. (Checked 2026-11-18; remaining 2026 funds are not published.)
  • Property tax. Texas has a property-tax exemption for solar energy devices (Tax Code §11.27). You apply on Form 50-123 with your county appraisal district, which for a "Humble" address may be Harris or Montgomery County.

So, is solar still worth it in 2026? Without the federal credit, the answer rests on three things you can check: a price near the benchmark, a system sized to the power you use, and a buyback plan that pays a fair rate for what you export. A quote that skips any of them asks you to take the value on trust.

One City of Humble home, priced and permitted

The example below runs those checks for one home inside the City limits. None of it is a price offer.

Illustrative calculation. A City of Humble household uses 13,152 kWh a year (the Texas average of 1,096 kWh a month in EcoGen's dataset; an illustrative household, not a Humble figure). An unshaded roof makes about 1,428 kWh per kW per year (EcoGen's Houston reference point).

Step Figure Label
Size-to-use ceiling 13,152 ÷ 1,428 = 9.21 kW DC Illustrative calculation
System on this roof 9.0 kW DC, about 12,852 kWh a year (97.7% of use) Illustrative calculation
Benchmark price 9.0 kW × $2.57/W = $23,130 State benchmark, cash, before incentives
Where the City's $20,000 line falls $20,000 ÷ $2.57/W = 7.78 kW Illustrative calculation
Sample quote, solar only $24,300 ÷ 9,000 W = $2.70/W, about 5% above benchmark Illustrative example
Same quote with a $12,000 battery folded in $36,300 ÷ 9,000 W = $4.03/W Illustrative example (wrong comparison)
CenterPoint credit 9.0 × $135 = $1,215 on the invoice Illustrative calculation; participating provider only
City electrical permit plus plan review $75 to $150, depending on which line applies Illustrative calculation from the 10/01/2024 fee schedule

The size-to-use ceiling is the largest system whose yearly output stays at or below yearly use; this 9.0 kW system stays just under it.

Inside the City, one more line matters. The City's plan-submittal text calls for a "State of Texas Engineer Seal and Signature, including M.E.P.'s" when a "Building is $20,000 or more in construction cost". At the benchmark price, any system above about 7.8 kW crosses that dollar line. The City's text does not say whether that line covers a rooftop solar alteration. Ask Building & Inspection, then get the answer written on the quote, including who pays for sealed drawings if they are needed.

The $2.70/W quote is 5% over the benchmark: close enough to discuss, not a reason to walk away. The $4.03/W figure is the same solar price with a battery hidden inside it, which is why you split lines first. Add the City's $100 contractor registration if the installer's electrician is not exempt, and ask whether it is billed to you.

Apply the CenterPoint credit after the $/W check, so a credit does not make an overpriced system look fair.

Your export plan is the same choice at every CenterPoint address

The permit route does not change this part. Texas has no statewide net metering, the rule some states use to credit exported power at or near the retail rate. CenterPoint is the wires utility: it owns the lines and meter but does not buy your solar power. In retail-choice areas, Texas Utilities Code §39.916 says you sell your surplus to the retail electric provider (REP) that serves your home "at a value agreed to" between you and that provider. The REP is the company named on the plan you chose.

So the address decides your paperwork, and your retail plan decides what your exports are worth. Inside the City, in Kingwood and in unincorporated Atascocita, every CenterPoint address faces the same buyback choice among three common structures:

  1. A capped kWh credit: exported kWh are credited up to a limit, such as your energy charges or your monthly use.
  2. A fixed export rate: a set price per exported kWh.
  3. A real-time wholesale rate: the price moves with the wholesale market at the time you export.

Each plan's terms are on its Electricity Facts Label (EFL), the standard disclosure sheet for a Texas retail plan, with its rates, contract end date and early-termination fee.

In the household above, suppose 40% of output is exported (an assumption): about 5,140 kWh a year. At hypothetical export values of 12¢, 6¢ and 3¢ per kWh, not taken from any EFL, those exports are worth about $617, $308 or $154 a year. Same roof, same permit: up to about $463 a year of difference comes from the plan alone.

Proposed service: the plan-match sheet would set your monthly export kWh against each of the three structures at the rates printed on that day's public EFLs, with credit caps, expiry rules and the renewal date. It would compare plan structures, name no provider and take no commission; you choose the plan. The Affordable Solar TX approach would work the same at any CenterPoint address in Humble, because the variable is the plan, not the permit office.

The size-to-use note (also proposed service) would state whether yearly output stays at or below yearly use. Under §39.916(k), that means neither you nor the system owner must register with the PUC, and fewer kWh ride on a buyback rate that can change at renewal.

The exception is the Entergy slice of 77339. Entergy Texas territory is not a retail-choice area, so there is no REP to choose, and the plan-match sheet would not apply in the same way. Ask Entergy Texas how it credits exported power before you size anything.

How the proposed service would work in Humble

Coverage of Humble addresses is proposed and not yet confirmed. The proposed service would run in five steps, and the address check comes second because it can change everything after it.

Proposed service steps:

  1. Usage pull. You download 12 months of 15-minute interval data from Smart Meter Texas and bring your current bill, your ESI ID and your plan's EFL. The ESI ID (Electric Service Identifier) is the long number on your bill that identifies your meter.
  2. Address check. We'd confirm the route on the City GIS map, note the flood zone and read the delivery utility off the bill. In the Entergy slice, that check changes the rest of the job.
  3. Roof, shade and panel. Roof age and hail history, usable faces, shade, main-panel rating and meter location.
  4. Self-use and export split. Hourly production modeled against your interval data, showing monthly kWh used directly and exported.
  5. Plan-structure screen. The three buyback structures scored against that export profile, from public EFLs.

Proposed service deliverables:

  • System quote. Layout, DC kW, equipment, yearly kWh, solar-only cash price and $/W, plus the permit route for your address and who files each piece: for a City of Humble address, the plan sets, R-100, flood fields and contractor registration. The CenterPoint line would appear only if the installer participates.
  • Plan-match sheet and size-to-use note, as described above.
  • Separate lines for a battery, a main-panel upgrade or roof work, never folded into the solar $/W.

Humble quote checklist: questions before you sign

The quote checklist on this site has the same questions in a form you can fill in.

Route and paperwork

  • Which office permits my address: City of Humble, City of Houston or Harris County?
  • Which utility is on my bill? If it is Entergy Texas, how does that change the system size and the export plan?
  • For a City of Humble address: who prepares the two plan sets, the one-line diagram and the load calculation, and who takes them to 114 W. Higgins St?
  • Who fills in the flood zone and base flood elevation on the R-100? If my lot is in the floodplain, who gets the elevation certificate and any floodplain development permit?
  • Is your electrical contractor registered with the City for the calendar year of my install? If the job crosses January 1, who renews it?
  • Will any work start before the permit is issued? (Inside the City, that doubles the permit fees.)
  • Does the City's $20,000 engineer-seal line apply to my system, and who pays for sealed drawings if it does?
  • For a Kingwood address: does my system qualify for automated review at the Houston Permitting Center today? For an unincorporated address: what did the County Engineer say about permits and the floodplain?

Price

  • What are the solar-only cash price, the DC kW and the $/W, and how does that compare with $2.57?
  • Are the battery, main-panel upgrade and roof work on separate lines?
  • Are you a participating CenterPoint provider? Is the $135/kW credit on this invoice, and what happens if the program's funds run out before installation?

Plan and size

  • Does yearly output stay at or below my yearly use?
  • What will my monthly exports be worth under a capped credit, a fixed rate and a wholesale rate, and after my plan renews?

The contract

Under SB 1036, the contract must say that a licensed electrical contractor performs the installation and conspicuously state that contractor's name and license number. It must say who obtains the permit and the utility's interconnection approval, and it must let you cancel in writing by the fifth business day. Since September 1, 2026, solar retailers and salespersons must be registered with TDLR, the Texas Department of Licensing and Regulation. Ask for both numbers and check them before you sign.

Lay the quotes side by side. The one worth signing names your route correctly, splits its lines, and is sized for the plan you will actually be on.